NEWS
CONTACT US
Mobile Number: 18926501143
Mobile Number: 13689505165
101, Building 1, No. 8 Fangxing Road, Longdong Community, Baolong Street, Longgang District, Shenzhen
What is the scope of the use of fluorine plastic pump?
Release time:
2020-08-05 12:03
Source:
Do you really know the scope of use of fluorine plastic pumps? Follow belowRecycling fluoroplasticssmall make up again simple look at it!
Fluorine plastic pump is used to transport water or other physical and chemical properties and water similar to the liquid, the temperature is not higher than 80 degrees Celsius. At the same time, according to different temperatures and media, suitable hot water, high temperature and corrosion resistant fluorine plastic pumps and oil pumps are extracted from general vertical pumps. It is suitable for urban environmental protection, construction, fire protection, chemical industry, medicine, dye, printing and dyeing, wine making, electric power, electroplating, papermaking, industrial and mining washing, equipment cooling and other industries. When buying pumps, we should also verify them. As long as these three certificates are complete, we can avoid buying screened products and inferior products. Therefore, in practice, it can only be estimated by 80% of the head and flow of the sign, and the matching power of the pump can be selected according to the power displayed on the sign. In order to make the pump start quickly, the power of the motor can also be slightly greater than the power required by the pump, generally greater than about 10%; if there is a power supply, the pump can be selected and purchased according to the power of the power machine.
After determining the type of pump, the economic function of the pump should be considered, and special attention should be paid to the selection of pump head and flow rate and the support power of the pump. It should be noted that the pressure head (total head) displayed on the pump mark is different from the outlet pressure head (actual head) in operation. This is due to a certain resistance loss when the water flows through the pipeline and its vicinity. Therefore, the actual head is generally 10% lower than the total head, and the water production is reduced accordingly.
To sum up, this is the case.Recycling fluoroplasticsXiaobian introduction on the scope of use of fluorine plastic pump, hope can help you.
