Fluoroplastic magnetic pump is a kind of chemical process pump which uses modern magnetic principle and permanent magnet to realize non-contact indirect transmission. When the motor drives the outer rotor (I. e., the outer magnetic steel) assembly to rotate, the magnetic lines of force drive the inner rotor (I. e., the inner magnetic steel) assembly and the impeller to rotate synchronously through the isolation sleeve under the action of the magnetic field, and the medium is completely enclosed in the static isolation sleeve. The purpose of no leakage of the pumping medium is achieved, and the leakage problem of the shaft seal of the mechanical transmission pump is completely solved. Following belowRecycling fluoroplasticsLet's take a brief look at how it works!
Fluoroplastic magnetic pump is composed of pump, magnetic drive and motor. The key components of the magnetic actuator are composed of an outer magnetic rotor, an inner magnetic rotor and a non-magnetic isolation sleeve. When the motor drives the outer magnetic rotor to rotate, the magnetic field can penetrate the air gap and non-magnetic substances, and drive the inner magnetic rotor connected to the impeller to rotate synchronously, thereby realizing the non-contact transmission of power and converting the dynamic seal into a static seal. As the pump shaft and the inner magnetic rotor are completely closed by the pump body and the isolation sleeve, the problems of "running, emitting, dripping and leaking" are completely solved, and the hidden dangers of flammable, explosive, toxic and harmful media leaking through the pump seal in the oil refining and chemical industry are eliminated, and the physical and mental health and safe production of employees are effectively maintained.
To sum up, this is the case.Recycling fluoroplasticsThe editor introduces the working principle of the fluorine plastic magnetic pump. I hope you can learn more about it through the introduction of the above editor.