Anti-corrosion insulation fluorine plastic pump plays an important role in the work of the pump. As we all know, the transmission of the pump medium is corrosive, and the degree of corrosion is different for the medium at different temperatures. How to improve the anti-corrosion and heat preservation effect of the pump?ETFE pelletssmall make up a simple understanding to see it!
Anti-corrosion is the primary solution to the problem of the pump. Fluoroplastic pumps should follow the operating procedures during the use and management process. This can improve the working efficiency and service life of the pump, and at the same time effectively reduce the leakage caused by mechanical system failure caused by misoperation. And leakage accidents, reduce the corrosion problem of enterprise equipment. Fluoroplastic itself has a good corrosion resistance, as long as we usually pay attention not to damage it, pay attention to protect the environment and economic conditions.
There are also protective measures to prevent corrosion caused by AC transmission lines. Generally speaking, the corrosion caused by AC is much smaller than that of DC, about 1% lower than that of DC. However, when the high-voltage AC transmission line is set in parallel with the pipeline, due to the influence of electrostatic field and alternating magnetic field, AC current will be generated on the metal pipeline, and the influence and harm to the pipeline cannot be ignored. In the case of superposition of AC and DC, the presence of AC will cause depolarization of the electrode surface and accelerate corrosion. In addition to try to avoid or shorten the length of parallel line segments.
Insulation is also essential, especially in cold weather. If the equipment is a closed storage equipment, the transfer piping and valves at various joints shall be insulated. In the case of open storage tanks, the environment must be effectively controlled to remove flammable and explosive materials. It is recommended to heat around the tank to ensure that the medium does not solidify.
Above is this time.ETFE pelletsSmall make up on the fluorine plastic pump anti-corrosion and insulation of some related knowledge, I hope can help you.