PRODUCTS

CONTACT US

Mobile Number: 18926501143

Mobile Number: 13689505165

101, Building 1, No. 8 Fangxing Road, Longdong Community, Baolong Street, Longgang District, Shenzhen

undefined
+
  • undefined

PFA Series

Introduction of PFA]<br />PFA plastic is a copolymer of a small amount of perfluoropropyl perfluorovinyl ether and polytetrafluoroethylene. The melt cohesiveness is enhanced, the solution viscosity is reduced, and the performance is unchanged compared with PTFE. This kind of resin can be directly processed into products by ordinary thermoplastic molding methods. Suitable for the production of corrosion-resistant parts, anti-wear parts, seals, insulation and medical equipment parts, high-temperature wires, cable insulation, anti-corrosion equipment, sealing materials, pump valve bushings, and chemical containers.<br />Characteristics of PFA]<br />1. Crystalline material, moisture absorption is small. It can be processed into products by common thermoplastic processing methods.<br />2. Suitable for the production of corrosion-resistant parts, anti-wear parts, seals, insulation parts and medical equipment parts.<br />3. High temperature wire, cable insulation layer, anti-corrosion equipment, sealing material, pump valve bushing, and chemical container.<br />

Product Category:

PFA Series


Contact Us
  • DESCRIPTION
  • 1, PFA (soluble polytetrafluoroethylene) heat resistance, cold resistance, chemical stability, mechanical properties, insulation, self-lubricating, folding resistance, excellent cracking resistance;

    2. Scope of application: At present, it is mainly used for anti-corrosion and anti-acid and alkali injection molding parts, high-temperature wire and cable, anti-acid and alkali lining parts, blow molding products, etc.

    PFA Technical Parameters
    Physical Performance Specific Gravity (g/CM3) 2.12~2.17
    Melting point (℃) 302~312
    Mechanical properties Tensile strength (2 ℃)> 27~29
    Elongation at break (23 ℃) 250~300
    Compressive strength (23 ℃-max) 16.7
    Hardness 60
    coefficient of dynamic friction 0.2
    Thermal performance Continuous maximum service temperature (℃) 250
    Thermal deformation temperature (1.8ZMPa) 47
    Linear expansion coefficient (temperature range) 12  12~100
    Electrical Performance Volume resistance rate (23 ℃ 5OXPH) >1018
    Insulation breakdown voltage 3.2mm thick 20
    dielectric constant 2.1
    Dielectric loss tangent (106Hz) <0.0003
     

    PFA

     

    img

     

    img

     

    img

     

    img

previous page

next page

previous page

next page